Wheels Manufacturing T47 Angular Contact Bottom Bracket For 30mm Spindles

T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. – Bearings: Enduro Angular Contact – Bottom Bracket/Frame Interface: T47 – Bottom Bracket Shell Width: 68mm – 132mm – Bottom Bracket Shell I.D.: 47×1.0mm Threaded – Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) – Tool Pattern: 48.5mm x 16-notch